Hood deflector Subaru Forester 2018-… (Vendor code: hic100-22641)

The color of the fly swatter is black.

The method of installation of the deflector is on clips.

The hood deflector performs several functions at once - aerodynamic, protective, aesthetic. This deflector is designed to protect the hood and windshield from chips. The difference between these hood deflectors in comparison with more expensive options in the presence of a bend, which directs the air flow with a certain swirl, helps to protect the windshield. From the aerodynamic side, there is no extraneous noise.

Instructions for installing the hood deflector:

• Open the hood of the car;
• Remove the protective polyethylene film from the deflector;
• Assemble the clips according to the drawing;
• Install the deflector on the hood so that the edge of the hood enters the lower bend of the brackets and align the fly swatter along the edges of the hood;
• Tighten the screw on the deflector bracket from one edge of the hood;
• Pull it in the opposite direction so that the deflector straightens along the edge of the hood, then tighten the other screws.