Side platforms Nissan X-Trail t30 Ø:42|51|60mm (Vendor code: b2-312)

Footrest material: INOX 304 stainless steel

The design of the footrest: - at the base is a stainless steel pipe, on the upper part of which is fixed by welding - a corrugated sheet.

Material of brackets: steel. Fasteners are designed for a certain car model. For fastening, technological holes of the car are used - standard places.

The diameter of the main pipe is 42 | 51 | 60 mm - optional.

The thickness of the pipe wall is 1.6 mm

The main advantages: protection of the car body from damage, help when getting in / out of the car, give a stylish look.

The main disadvantages: lowers the car's ground clearance by an average of 1.8 - 2 cm.

Complete set:

• Side steps - 2 pcs.
• Fastening set.
• Installation scheme - for a specialist.

Installation procedure:

• Attach the brackets to the body and determine the installation locations.
• Install the brackets using the included fasteners.
• Install the footrests, fasten with screws and nuts.
• Adjust the position of the footrests relative to the body.
• Tighten all fastening points.
• Check the tightening of the fastening points - tighten if necessary.